Polycom Telephone 1725 11240 001 User Manual

MICROPHONE MUTE  
CALL TRANSFER  
1. During a call, press the Trans soft  
key (the active call is placed on hold).  
BASIC PHONE FEATURES  
During a call, press  
. Mute applies to  
PLACING A CALL  
Using the Handset:  
Pick up the handset and enter the  
number or enter the number first, and  
then pick up the handset.  
all modes: handset, headset, and  
hands-free. You can hear all other  
parties while Mute is enabled.  
Press the Blind soft key to transfer the  
call without speaking to the second  
party.  
To turn off Mute, press  
again.  
Using the hands-free Speakerphone:  
CALL HOLD AND RESUME  
1. During a call, press  
2. Press again, the Resume soft  
2. Place a call to the party to which you  
want to transfer the call.  
3. After speaking with the second party,  
press the Trans soft key to complete  
the transfer.  
1. With the handset on-hook, press  
or any assigned line key.  
,
.
2. Dial the number.  
Or dial the number, and then press  
key, or the line key to resume the call.  
.
Using the optional Headset:  
1. With the headset connected, press:  
Transfer may be cancelled during  
establishment by pressing the Cancel  
soft key. The original call is resumed.  
When a call has been on hold for an  
extended period of time, both visual  
and audible alerts may appear.  
-
-
any assigned line key, or  
the NewCall soft key.  
LOCAL CONFERENCE CALLS*  
To create a three-way local  
conference call:  
2. Press  
3. Dial the number.  
.
CALL FORWARDING  
To enable call forwarding:  
Or dial the number, and then press  
.
1. Call the first party.  
1. Press  
and select Features,  
2. Press the Conf soft key to create a  
new call (the active call is placed on  
hold).  
3. Place a call to the second party.  
4. When the second party answers,  
press the Conf soft key again to join all  
parties in the conference.  
and then Forward.  
During a call, you can alternate  
between handset, headset, or hands-  
2. Select a Forwarding Type from  
Always, No Answer, and Busy.  
3. For all types, enter a number to  
forward all future calls to.  
4. For No Answer, enter the number of  
rings before forwarding.  
5. Press the Enable soft key to confirm  
Call Forwarding. A moving arrow icon  
appears for that line to confirm Call  
Forwarding is enabled.  
SoundPoint® IP 32x/33x  
free modes by pressing the  
keys, or picking up the handset.  
or  
Quick User Guide  
ANSWERING A CALL  
Using the Handset:  
Pick up the handset.  
Using the Speakerphone:  
Press:  
When a conference has been  
established, pressing the Split soft  
key will split the conference into two  
calls on hold.  
Basic Phone Features  
Customizing Your Phone  
-
-
-
, or  
the line key, or  
the Answer soft key.  
To disable call forwarding:  
Applies to phones running SIP 3.1.3 or  
later.  
Placing the call on hold on the  
conference originator’s phone will  
place the other parties in the  
conference on hold.  
1. Press  
and select Features,  
Using the optional Headset:  
and then Forward.  
Press  
.
For detailed information please consult  
the comprehensive SoundPoint IP  
32x/33x User Guide available at:  
2. Select a Forwarding Type from  
Always, No Answer, and Busy.  
3. Press the Disable soft key.  
Incoming calls may be ignored by  
pressing the Reject soft key during  
ringing.  
A conference may be created at any  
time between an active call and a call  
which is on hold (on the same line or  
another line) by pressing the Join soft  
key.  
Call forwarding is not available on  
shared lines.  
ENDING A CALL  
Using the Handset:  
Hang up or press the EndCall soft key.  
Using the Speakerphone:  
If call forwarding is configured on the  
call server (invoked using * code dialing  
or from a PC-based application), then  
particulars and menu options may vary.  
Ending the call on the conference  
originator’s phone will allow the other  
parties to continue the conference.  
©2009 Polycom, Inc. All rights reserved.  
Press  
or the EndCall soft key.  
___ _  
Polycom, the Polycom logo and SoundPoint are registered  
trademarks of Polycom, Inc. in the U.S. and various countries.  
All other trademarks are the property of their respective owners.  
Information in this document is subject to change without notice.  
Using the optional Headset:  
* - Conferencing is an optional feature that must be  
configured on the call server. Particulars and menu  
options may vary.  
Press or the EndCall soft key.  
SoundPoint IP 32x/33x Quick User Guide. 1725-11240-001 Rev C. 6/2009  
1
 

Philips Answering Machine SS191P User Manual
Philips Computer Monitor 107C64 User Manual
Philips TV Cables SWA2522T User Manual
Philips TV Cables SWV6694 User Manual
Philips TV Video Accessories STS1000 00 User Manual
Pioneer Car Video System CLD 1030 User Manual
Pioneer Stereo Receiver PRV LX1 User Manual
Plinius Audio MP3 Player TIKI Network Audio Player User Manual
Premio Computer Kitchen Entertainment Center Premio Computer User Manual
Professional Series Burner PS77301 User Manual