Polycom Cell Phone KH 458 User Manual

Inter-Tel Eclipse  
LinkPlus Interface Guide  
SpectraLink 6000 System  
SpectraLink 8000 System  
July 2008 Edition  
1725-36136-001  
Version E  
 
About this Guide  
Polycom is the market leader in multi-cellular wireless telephone  
systems for the workplace. We manufacture a range of products to  
suit any size installation. All Polycom products use our LinkPlus  
digital integration technology to integrate with various digital switch  
platforms. Using LinkPlus technology, Wireless Telephones  
(handsets) emulate digital telephone sets to deliver advanced  
capabilities such as multiple line appearances and LCD display  
features. This document explains the programming or administration  
required to use the host digital switch with the following Polycom  
products:  
SpectraLink 6000 System - SpectraLink 6300 MCU  
The SpectraLink 6300 MCU supports up to 3,200 handsets and up to  
1,000 Base Stations. Up to 25 shelves can be interconnected for  
maximum system capacity.  
SpectraLink 6000 System – SpectraLink 6100 MCU  
Designed for smaller installations supporting up to 64 handsets and  
up to 16 Base Stations. Up to four MCU controllers can be  
interconnected for maximum system capacity.  
SpectraLink 8000 Telephony Gateway  
The SpectraLink 8000 Telephony Gateway is a wireless telephony  
product that provides high quality packetized voice communications  
using the Internet Protocol (IP).  
Different models of SpectraLink Wireless Telephones vary in  
functional capabilities. This document covers the basic operational  
features of all handsets. However, certain handset or PBX features  
may not be supported by your emulation.  
PN: 1725-36136-001_E.doc  
3
 
LinkPlus Interface Guide: Inter-Tel Eclipse  
Related Documents  
SpectraLink 6300 MCU : Operator’s Console (1725-36125-001)  
SpectraLink 6100 MCU: Installation and Operation (1725-36097-001)  
SpectraLink 6020 Wireless Telephone and Accessories User Guide  
(1725-36092-001)  
Available at  
SpectraLink 8000 Telephony Gateway: Administration Guide for SRP  
(1725-36028-001)  
SpectraLink 8020/8030 Wireless Telephone and Accessories User Guide  
(1725-36023-001)  
SpectraLink e340/h340/i640 Wireless Telephone: Configuration and  
Administration (SRP) (72-1065-09)  
Available at  
Telephone Switch Interface Matrix (1725-36128-001)  
Available at  
Customer Support  
Polycom wants you to have a successful installation. If you have  
questions please contact the Customer Support Hotline at  
(800) 775-5330. The hotline is open Monday through Friday,  
6 a.m. to 6 p.m. Mountain time.  
For Technical Support: [email protected]  
For Knowledge Base:  
PN: 1725-36136-001_E.doc  
4
 
About this Guide  
Icons and Conventions  
This manual uses the following icons and conventions.  
Caution! Follow these instructions carefully to avoid danger.  
Note these instructions carefully.  
Label  
This typeface indicates a key, label, or button on SpectraLink  
hardware.  
PN: 1725-36136-001_E.doc  
5
 
 
1
Plan the Interface  
The system administrator programs the telephone system for use with  
the Wireless Telephone System using the normal administration  
terminal or procedures. Programming can be done after the handsets  
are registered.  
Recommended programming includes assigning extension numbers  
to the handsets and programming features on the telephone system so  
they are easily accessible from the handsets.  
For analog interfaces, macro codes are in the document relating to  
configuring the system. See SpectraLink 6300 MCU: Operator’s Console,  
SpectraLink 6100 MCU: Installation and Operation, or SpectraLink 8000  
Telephony Gateway: Administration Guide for SRP.  
The following information will help the system administrator set up  
the SpectraLink handsets to operate in a way that feels familiar and  
comfortable to users.  
Plan Programming  
Digital Interface programming for the Wireless Telephone System will  
be faster if it is planned in advance by verifying the parameters and  
features on the current telephone system and wired phones. The  
system administrator must assign extension numbers to the handsets  
and plan the functions (trunk access, toll restrictions, system features,  
ringing options etc.) to be programmed for the handsets.  
One of these scenarios concerning how the handsets are programmed  
should apply to this site:  
All handsets are programmed alike: All handsets will be  
programmed exactly the same. Depending on the capabilities of  
the switch, the system administrator can often program one  
handset and use it as a model for all other handsets.  
Groups of handsets are programmed alike: handsets are grouped  
into classes that are programmed alike. Depending on the  
capabilities of the switch, the system administrator can program  
PN: 1725-36136-001_E.doc  
7
 
LinkPlus Interface Guide: Inter-Tel Eclipse  
“model” handsets then use the model as a template to program  
the other handsets.  
All handsets are different: All handsets are programmed differently,  
so each handset will be programmed individually.  
Before installation, the parameters of the wired phones should be  
verified to plan the parameters required for the handsets.  
Extension assignment  
What extension numbers will be assigned to the handsets?  
Outgoing line access  
Which line will be selected when the user goes off-hook?  
System forwarding  
If this system supports forwarding, what is the forwarding path and  
forwarding conditions for this telephone? Does it belong to a hunt  
group?  
Toll restrictions  
To which toll restriction class of service should each line be assigned?  
Mailboxes  
What are the parameters of this line’s voice mailbox?  
Programmable keys  
Determine which features, if any, should be programmed on the  
handsets. These assignments may emulate assignments on the user's  
desk set.  
If possible, identify a Display Phone that is programmed exactly or  
close to the way the handsets should be programmed. The Display  
Phone can be used to copy the programming to the new handsets.  
PN: 1725-36136-001_E.doc  
8
 
Plan the Interface  
Assign Extension Numbers  
The wire contractor should inform the system administrator which  
port numbers have been designated for the handsets.  
The system administrator may use the Extension Assignments  
Worksheet at the end of this document to track the port numbers,  
extensions, users, and features assigned to handsets.  
The Wireless Telephone Display  
The SpectraLink Wireless Telephone will display the telephone  
number as it is dialed.  
Certain characters may be used by the system that are not  
implemented in the handset. Flashing characters are not implemented  
on the handset, nor is rolling or scrolling of text.  
Handset indicators  
Line indicators are associated with line access keys. Status indicators  
or icons are associated with voicemail, low battery function, other  
functions, and service interruption. A left or right arrow is displayed  
when the screen can be toggled either left or right to display more  
characters.  
The following table describes the line icon characteristics and the  
related Eclipse Display Phone LED indication.  
Line  
Indicator  
Associate Display Phone  
LED Equivalent  
Description  
Off  
On hook or not in use  
Off  
On Steady  
Slow Blink  
Fast Blink  
Wink  
I/C or Line in use  
Slow Blink or Steady Light  
Medium Blink  
Fast Blink  
I/C or Line is re-calling from Hold or Transfer  
I/C or Line is ringing or camped on  
I/C or Line is on Hold  
Flutter  
PN: 1725-36136-001_E.doc  
9
 
LinkPlus Interface Guide: Inter-Tel Eclipse  
Feature Programming Requirements  
When planning the interface, the following information must be taken  
into account:  
Line sequences  
The handset uses two types of key sequences to access PBX features  
and multiple lines. Line sequences are those where the user presses  
the LINE key and then a number key. The key-map design designates  
“line” keys that should be programmed for line appearance so that  
they correspond to line sequences on the handset.  
The LINE icon on the handset will reflect activity on the corresponding  
deskset key. For this reason, it is recommended that line appearance  
keys be used only for line access. If only one line is assigned to a  
particular handset, leave the other designated line keys identified on  
the key maps unassigned. The corresponding handset LINE + key  
sequences will then have no function.  
Function sequences  
Function sequences are those where the handset user presses the FCN  
key and then a number key. Designated “function” deskset keys  
programmed to system features such as Transfer and Conference may  
have their corresponding menu items display on the handset function  
menu. See the key-map diagram for the function keys that are  
available for feature programming.  
Function Menu Programming  
SpectraLink 6300 MCU  
The function menu text defaults for the handsets associated with the  
SpectraLink 6300 MCU can be changed via the SpectraLink Operator’s  
Console.  
PN: 1725-36136-001_E.doc  
10  
 
Plan the Interface  
SpectraLink 6100 MCU  
For the SpectraLink 6100 MCU, the handset function menu text can  
only be changed via remote configuration through the services of  
Polycom’s Customer Support.  
SpectraLink 8000 Telephony Gateways  
Function menu text options can be changed in the Administration  
Console of the SpectraLink 8000 Telephony Gateways.  
Hold  
The Hold feature should be programmed to the Hold key as shown  
on the key-map diagrams so that when the Hold key or softkey is  
pressed on the handset, the call is placed on hold.  
Mute  
The handset Mute function is hard-coded to FCN +1 on the PTB4xx  
handset. This function sequence is recommended, but the system  
administrator can assign the Mute function to any available function  
key sequence or leave the function unassigned. The SpectraLink 6000  
and SpectraLink 8020/8030 Wireless Telephones use a Mute softkey.  
Voicemail  
The message-waiting icon on the handset is activated with the  
message indication of the deskset. The voice mail feature on the  
deskset must be assigned to the feature key as shown in the key-map  
diagrams. Do not assign any other feature to this key, since the  
associated LED is directly mapped to the message-waiting icon on the  
handset. This LED assignment must be used in order to support the  
message-waiting icon. Using this key for any other feature or for line  
access could cause unacceptable system performance.  
Speakerphone  
If a handset such as the PTB 4xx has no speaker, speakerphone  
function and functions that require the use of the volume keys will  
not be made available on the handset.  
PN: 1725-36136-001_E.doc  
11  
 
LinkPlus Interface Guide: Inter-Tel Eclipse  
Ring types  
Handset ring types (soft, normal, vibrate, etc.) are programmed by the  
handset user and are not accessible or changeable by the system  
switch. Whenever possible the audible ringer on the handset will  
follow the cadence provided by the system switch. Call progress tones  
provided by the host system will be passed through to the handset.  
PN: 1725-36136-001_E.doc  
12  
 
2
Interface Implementation  
This section describes the recommended programming to use the  
Wireless Telephone System with an Inter-Tel Eclipse PBX with an  
Associate Display Phone. The procedures assume:  
The Eclipse system is installed and operational in an approved  
configuration. See the Telephone Switch Interface Matrix document  
for tested configurations.  
A trained Inter-Tel technician or system administrator will be on  
site with the SpectraLink installer to program the system.  
The SpectraLink 6000 System or SpectraLink 8000 Telephony  
Gateway is installed and the handsets are available for  
programming.  
The Inter-Tel Eclipse digital interface to the SpectraLink 6000  
System is licensed for use in the U.S. and Canada only  
Set the Switch Interface Type  
SpectraLink 6100 MCU  
The Link 150 Master Control Unit requires the switch interface type to  
be configured using the front panel buttons. The configuration  
procedures are detailed in the SpectraLink 6100 MCU: Installation and  
Operation document.  
SpectraLink 6300 MCU  
When configuring the SpectraLink 6300 MCU, the PBX interfaces are  
available as sub-menu selections when defining the Interface Module  
type using the SpectraLink 6300 MCU Operator’s Console. Refer to  
SpectraLink 6300 MCU: Operator’s Console for details on configuring  
the Interface Modules.  
PN: 1725-36136-001_E.doc  
13  
 
LinkPlus Interface Guide: Inter-Tel Eclipse  
SpectraLink 8000 Telephony Gateways  
Connect to the SpectraLink 8000 Telephony Gateway using the serial  
or modem interface. From the Main Menu, choose Gateway  
Configuration. Scroll to Telephone Switch Type and press enter to  
change this field, from the Submenu of PBX types, select Inter-Tel  
Axxess or Axxent. Refer to SpectraLink 8000 Telephony Gateway:  
Administration Guide for SRP for details on configuring the Telephone  
Switch Type.  
Key-mapping the Handset to Emulate Associate  
Display Phone Functionality  
Line + 1  
Line + 7  
Call 1  
Line + 8 Line + 2  
Call 2  
Line + 9  
Line + 3  
Call 3  
FCN + 3 Line + 4  
Call 4  
FCN + 4 Line + 5  
IC  
Outgoing  
FCN + 7  
FCN + 1  
MUTE  
FCN + 2  
FWD  
FCN + 8  
TRANS  
REDL  
Redial  
MUTE  
FWD  
Transfer  
HOLD  
FCN + 5  
CNF  
CNF  
SPCL  
SPCL  
FCN + 9  
SYSPD  
Sys SPDL  
Spkr  
Page Zone  
Page  
Sta SPDL  
Line + #  
Vol up  
Line + 6  
DND  
FCN + 6  
MSG  
Line + *  
Vol down  
BGM  
MSG  
Associate Display Phone Key Mapping  
PN: 1725-36136-001_E.doc  
14  
 
Interface Implementation  
The FCN + [number] and LINE + [number] labels represent the key  
sequence on the handset mapped to the corresponding key on the  
desk set.  
The handset displays a LINE icon that corresponds to each line key.  
The voicemail icon displays for voice mail/FCN + 6. See the Handset  
Icons section above for details.  
The handset function menu default settings are shown for each  
corresponding sequence on the diagram above and in the table below;  
these may be changed as described above in Function Menu  
Programming. Some of these functions (Mute, Redial, Forward, etc.)  
are activated by softkeys or FCN menu options on the SpectraLink  
6000 and SpectraLink 8020/8030 Wireless Telephones.  
FCN + 1  
FCN + 3  
FCN + 5  
FCN + 7  
FCN + #  
FCN + 2  
FCN + 4  
FCN + 6  
FCN + 8  
FCN + *  
MUTE  
FWD  
CNF  
MSG  
REDL  
SPCL  
TRANS  
(Cancels out of the handset  
display)  
Program Eclipse PBX and handsets  
Program the Inter-Tel Eclipse PBX for use with the Wireless  
Telephone System using the Eclipse Database Programming software  
that is loaded on your programming PC.  
Copy settings from a wired set  
If possible, copy the settings from an existing Display Phone with  
similar features and keys to create a “template” handset. Once this is  
done, you can program additional options on one handset, then copy  
the programming to other handsets or groups of handsets.  
Station features for handset  
Program the features and keys on the handset in the Individual  
Station Programming area on your programming PC. Program the  
following as required for the parameters required on the handsets:  
Account Codes, Mailboxes, Miscellaneous Flags, Miscellaneous Port  
Information, Miscellaneous Station Information, Programmable Keys,  
PN: 1725-36136-001_E.doc  
15  
 
LinkPlus Interface Guide: Inter-Tel Eclipse  
Special Purpose Station, System Forwarding, Toll Restrictions, and  
Voice Mail information.  
Keyset map: Select the standard keyset map.  
Ring Intercom: This feature must be enabled. The default is no;  
change to yes.  
Shared Speakerphone: Disable this feature on the PTB 4xx handset,  
as it is not supported on this handset.  
Copy Programming  
After the model handset or handsets have been programmed, use the  
copy function to copy the programming to all “like” handsets. The  
installer can now test the handsets.  
Note: The handset will not emulate ring tones.  
PN: 1725-36136-001_E.doc  
16  
 
3
Extension Assignments Worksheet  
Shelf: _______ Interface Module: _______  
Interface  
Module  
Circuit #  
Handset  
Serial #  
Handset #  
Ext. #  
Name  
Comment  
Handset 1  
Handset 2  
Handset 3  
Handset 4  
Handset 5  
Handset 6  
Handset 7  
Handset 8  
Handset 9  
Handset 10  
Handset 11  
Handset 12  
Handset 13  
Handset 14  
Handset 15  
Handset 16  
1
2
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
PN: 1725-36136-001_E.doc  
17  
 

Pelco Landscape Lighting C3420M User Manual
Philips Clock Radio MG C105 17 User Manual
Philips Electric Shaver 4853XL User Manual
Philips MP3 Docking Station DCM105 User Manual
Philips Network Card SNN6500 00 User Manual
Philips Switch SWS7686W 12 User Manual
Planar Car Video System PXL2760MW User Manual
Planet Technology Network Card WAP5 User Manual
Polk Audio Speaker DSWPRO400 User Manual
Poulan Lawn Mower Accessory 140603 User Manual